• 1. Locate the DIN output and the IR Out on the rear of the ND5 XS 2.
  • 2. Connect the interconnect cable to the DIN output port.
  • 3. Depending on the Naim pre amp model you are connecting, you may need to use a 3.5mm jack to RCA cable; or a 3.5mm to 3.5mm jack cable to connect the two devices together.

    Connect a 3.5mm jack cable to the IR Out on the ND5 XS 2.
  • 4. Depending on your Pre amp model, connect the other end of the 3.5mm jack cable to either the Remote in or RC5 input on the back of the pre amp.
  • 5. Connect the other end of the interconnect lead to the desired DIN input on the Naim pre amp.
  • 6. Open the Naim app.
  • 7. Touch the Settings icon.
  • 8. Touch System Automation.
  • 9. To enable system automation, touch System Automation.
  • 10. Touch the desired Preamp type. E.g. Touch Classic.
  • 11. Touch the desired Preamp Streamer Input. E.g. Touch Preamp 1.
  • 12. System automation is now set up and the Naim preamp can now be controlled from the Naim app.