• Take great care when lifting, carrying and inverting Mu-so to access the mains power, network and digital audio sockets. Do not invert Mu-so so that its weight is borne by the top panel or rotary control. Do no stand Mu-so on either end panel or on its front grille.
  • 1. Rest Mu-so on its heat sink, then disconnect the power supply lead from the underside of Mu-so.
  • 2. Connect a standard Ethernet cable to the network port on the right underside of Mu-so.
  • 3. Reconnect the power supply lead.
  • 4. Touch the Power icon on the rotary locator dial.

    Mu-so will only switch on into standby if that was the last state it was left in. Otherwise it will boot up completely.

  • 5. After approximately 30 seconds a white indicator light will appear on the right side panel confirming Mu-so is connected to your local network.