• 1. Disconnect the power supply lead from the back of the Mu-so Qb.
  • 2. Connect a standard Ethernet cable to the network port on the back of the Mu-so Qb.
  • 3. Reconnect the power supply lead.
  • 4. Touch the Power icon on the rotary locator dial.

    The Mu-so Qb will only switch on into standby if that was the last state it was left in. Otherwise it will boot up completely.

  • 5. After approximately 30 seconds a white indicator light will appear on the right side panel confirming the Mu-so Qb is connected to your local network.